Rocky Mountain Sharp Shop

Sales: Sawblades
A.G.E. Series From Amana Tool
AMANA A.G.E. Series SAW BLADES		 A.G.E. Series
We at Rocky Mountain Sharp Shop are proud to announce the expansion of our Amana A.G.E. Series to include:
Thin Kerf; Industrial Solid Surface, as well as the new A.G.E. Steel Force Blades!
 All of the A.G.E. Blades are laser-cut from virgin steel, flattened, ground, and tensioned.
They are tipped with large European-style carbide tips.
These blades provide smooth, accurate cutting, excellent performance and outstanding value.
ITEM NUMBER
PRICE
CUTOFF-CROSSCUT

 Designed for smooth crosscuts in a variety of materials from hardwoods, softwoods and sheet stock including chipboard.
The alternate top bevel and 10 degree hook angle provide a smooth surface and a long cutting life.
ALTERNATE TOP BEVEL TEN INCH BLADES CROSSCUT
A.G.E. 1060ATB
A.G.E. 1080ATB		 10 INCH - 60 TOOTH -  CUTOFF|CROSSCUT - 5/8 INCH BORE
10 INCH - 80 TOOTH -  CUTOFF|CROSSCUT - 5/8 INCH BORE		 $59.58
$74.40

TWELVE INCH BLADES
A.G.E. 1260ATB
A.G.E. 1272ATB
A.G.E. 1280ATB
A.G.E. 1296ATB		 12 INCH - 60 TOOTH -  CUTOFF|CROSSCUT - 1 INCH BORE
12 INCH - 72 TOOTH -  CUTOFF|CROSSCUT - 1 INCH BORE
  12 INCH - 80 TOOTH - CUTOFF|CROSSCUT - 1 INCH BORE 
12 INCH - 96 TOOTH -  CUTOFF|CROSSCUT - 1 INCH BORE		 $69.40
$79.85
$96.64
$89.70



GENERAL PURPOSE

 Designed with a medium tooth count to cover a wide variety of cuts in hardwoods and softwoods.
Provides good results ripping and crosscutting in a variety of materials.
ALTERNATE TOP BEVEL TEN INCH BLADES GENERAL PURPOSE
A.G.E. 1040ATB
 10 INCH - 40 TOOTH -  GENERAL PURPOSE - 5/8 INCH BORE $51.96

TWELVE INCH BLADES
A.G.E. 1248ATB 12 INCH - 48 TOOTH -  GENERAL PURPOSE - 1 INCH BORE $57.55

  SIXTEEN INCH BLADES  
A.G.E. 1660ATB 16 INCH - 60 TOOTH -  GENERAL PURPOSE - 1 INCH BORE $108.95



GLUE LINE RIPPING

 This special glue line blade shears the wood cleanly so there is no need to joint the stock prior to gluing.
The precision triple-chip grind & extra-high hook angle allow aggressive feed rates, yet produce an extra-smooth cut finish.
The thick plate and laser cut expansion slots minimize vibration.
Use on table saws, sliding table saw, single and gang-rip operations.
TRIPLE CHIP GRIND   TEN INCH BLADES  RIPPING
A.G.E. 1030GLUELINE 10 INCH - 30 TOOTH - GLUE LINE - 1 INCH BORE $59.33

TWELVE INCH BLADES
A.G.E. 1236GLUELINE 12 INCH - 36 TOOTH - GLUE LINE - 1 INCH BORE $117.92



HEAVY DUTY RIPPING

 Specifically designed for efficient, smooth ripping.
The low tooth count and large gullets combine to make this blade fast and aggressive.
Design ensures precise cuts. Laser-cut expansion slots virtually eliminate vibration and noise.
For use in Table Saws or Gang-Rip Saws.
ALTERNATE TOP BEVEL TEN INCH BLADES RIPPING
A.G.E. 1024ATB 10 INCH - 24 TOOTH -  HEAVY-DUTY RIPPING - 5/8 INCH BORE $42.96

  TWELVE INCH BLADES  
A.G.E. 1228ATB 12 INCH - 28 TOOTH -  HEAVY-DUTY RIPPING - 30MM BORE - 20° HOOK
 $49.97



    THIN KERF RIPPING

Ideal for underpowered saws.
The thin kerf consumes far less horsepower than the typical blade.
The low tooth count and large gullets combine with the thin kerf to make this blade fast cutting.
This blade will, in effect, boost your saw's horsepower.
ALTERNATE TOP BEVEL EIGHT INCH BLADES
RIPPING
A.G.E. 822THIN 8 INCH - 22 TOOTH - THIN KERF RIPPING - 5/8 INCH BORE  - 20° HOOK $39.35

TEN INCH BLADES
A.G.E. 1024THINATB 10 INCH - 24 TOOTH - THIN KERF RIPPING - 5/8 INCH BORE  - 20° HOOK
 $42.96
A.G.E. 1060THIN 10 INCH - 60 TOOTH - THIN KERF RIPPING - 5/8 INCH BORE  - 20° HOOK $69.58
COMBINATION

 Designed to rip and crosscut hardwoods, softwoods, and sheet stock such as plywood and particleboard.
It features the combination blade design: four Alternate Top Bevel teeth with a flat-top raker.
The laser-cut slots virtually eliminate vibration and noise for smooth, quiet cutting.
ALTERNATE TOP BEVEL
 TEN INCH BLADES COMBINATION
A.G.E. 1050COMB 10 INCH - 50 TOOTH - COMBINATION FOUR ATB & ONE RAKER - 5/8 INCH BORE $57.50

TWELVE INCH BLADES
A.G.E. 1260COMB
12 INCH - 60 TOOTH - COMBINATION FOUR ATB & ONE RAKER - 1 INCH BORE
 $99.95



THIN KERF COMBINATION

Effectively rip and crosscut hardwoods, softwoods, as well as sheet stock such as plywood and particleboard.
It features the time-tested combination blade design: four Alternate Top Bevel teeth with a flat-top raker.
The laser cut slots virtually eliminate vibration and noise for smooth, quiet cutting.
The thin-kerf design requires less horsepower while generating less feed resistance.
ALTERNATE TOP BEVEL TEN INCH BLADES COMBINATION
A.G.E. 1050COMB/THIN 10 INCH - 50 TOOTH - THINK KERF COMBINATION - FOUR ATB & ONE RAKER - 5/8 INCH BORE  $57.50



THIN KERF MITER

Designed for smooth crosscuts in a variety of materials from hardwoods, softwoods and sheet stock including chipboard.
Ideal for underpowered saws; the thin kerf reduces the horsepower requirements.
ALTERNATE TOP BEVEL TEN INCH BLADES MITER
A.G.E. 1060THIN/MITER 10 INCH - 60 TOOTH - THIN KERF MITER - ZERO HOOK - 5/8 INCH BORE $69.58
A.G.E. 1080/THIN/MITER 10 INCH - 80 TOOTH - THIN KERF MITER - ZERO HOOK - 5/8 INCH BORE $76.80

TWELVE INCH BLADES
A.G.E. 1260/THIN
A.G.E. 1280/THIN/ATB
 12 INCH - 60 TOOTH - THIN KERF MITER -  ZERO HOOK - 1INCH BORE
12 INCH - 80 TOOTH - THIN KERF MITER - ZERO HOOK - 1 INCH BORE
 $67.55
$89.35



THIN KERF SLIDING COMPOUND MITER

Specially designed for sliding compound miter saws, this thin kerf blade provides an exceptional finish.
The 5 degree negative hook angle provides an extra margin of safety by pushing the stock downward and toward the fence.
The thin kerf reduces waste in expensive materials and requires less horsepower.
ALTERNATE TOP BEVEL TWELVE INCH BLADES COMPOUND  MITER
A.G.E. 1272/THIN/MITER 12 INCH - 72 TOOTH - THIN KERF SLDG COMPOUND MITER - NEGATIVE 5° HOOK - 1 INCH BORE $69.10



PLYWOOD & LAMINATE

 Specifically designed for clean cuts in plywood and single-sided laminates.
Greater number of teeth, triple-chip grind, and 10 degree hook angle provide excellent balance between feed resistance and finish.
TRIPLE CHIP GRIND EIGHT INCH BLADES PLYWOOD | LAMINATE
A.G.E. 864 8 INCH - 64 TOOTH - PLYWOOD|LAMINATE - 5/8 INCH BORE $59.77

TEN INCH BLADES
A.G.E. 1040TCG
A.G.E. 1060TCG
A.G.E. 1080TCG		 10 INCH - 40 TOOTH - PLYWOOD|LAMINATE - 5/8 INCH BORE
10 INCH - 60 TOOTH - PLYWOOD|LAMINATE - 5/8 INCH BORE
10 INCH - 80 TOOTH - PLYWOOD|LAMINATE - 5/8 INCH BORE		 $59.77
$59.58
$74.40

TWELVE INCH BLADES
A.G.E. 1272TCG
A.G.E. 1296TCG
 A.G.E. 12100TCG
 12 INCH - 72 TOOTH - PLYWOOD|LAMINATE - 1 INCH BORE
  12 INCH - 96 TOOTH - PLYWOOD|LAMINATE - 1 INCH BORE
12 INCH - 100 TOOTH - PLYWOOD|LAMINATE - 1 INCH BORE 		$79.85
$99.40
$99.40



DOUBLE-SIDED MELAMINE

 Designed for chip-free cuts in melamine on saws without a scoring unit.
The sharp 25 degree bevels slice cleanly through fragile coatings and laminates.
Extra hard sub-micro grain carbide tips for long life.
HIGH ANGLE ATB
 TEN INCH BLADES MELAMINE
A.G.E. 1080MELAMINE
 10 INCH - 80 TOOTH - HIGH ANGLE ATB - 5/8 INCH BORE
$89.95

TWELVE INCH BLADES
A.G.E. 1296/MEL 12 INCH - 96 TOOTH - HIGH ANGLE ATB - 5/8 INCH BORE $109.12



THIN KERF DOUBLE-SIDED MELAMINE

 This blade is designed for chip-free cuts in melamine on saws without a scoring unit.
The sharp 25 degree bevels slice cleanly through fragile coatings and laminates.
Extra hard sub-micro grain carbide tips for long life.
Thin kerf design reduces horsepower requirements.
HIGH ANGLE ATB TEN INCH BLADES MELAMINE
A.G.E. 1080MEL/THIN 10 INCH - 80 TOOTH - HIGH ANGLE ATB - 5/8 INCH BORE - NEGATIVE 5° HOOK
 $89.95



THIN-WALLED NON-FERROUS METAL/ALUMINUM

Designed specifically for cutting relatively thin-walled aluminum and non-ferrous extrusions and frames.
Use a coolant or blade wax and clamp down the work piece when cutting non-ferrous metals.
Warning: NEVER attempt to cut ferrous metals (steel, iron, etc.) with these saw blades.
Non-Ferrous blade is not to be used on multi-purpose cut-off saws or gas power saws, unless saw has a guard on both the upper half and lower half of the blade.
The guard must extend to the lowest point of the cutting teeth on the bottom of the blade.
Consult machine owner’s manual and follow all instructions and safety procedures - including wearing safety goggles at all times while working with this blade.
NOTE: Due to the rough applications for which these blades may be used, they are not guaranteed.
TRIPLE CHIP GRIND TEN INCH BLADES NON-FERROUS
A.G.E. 1080/NONFER 10 INCH - 80 TOOTH - THIN-WALLED NON-FERROUS - 5/8 BORE
 $109.95

TWELVE INCH BLADES
A.G.E. 12100/NONFER 12 INCH - 100 TOOTH - THIN-WALLED NON-FERROUS - 1 INCH BORE
 $129.59

FOURTEEN INCH BLADES
A.G.E. 14108/ALUM 14 INCH - 108 TOOTH - THIN-WALLED ALUMINUM - 1 INCH BORE $155.99



 SOLID SURFACE
Designed for cutting plastic laminate, Plexiglas®, and solid surface materials such as:
 Avonite®, Dupont Corian®, Wilsonart®, Gibraltar®, Earthstone® Fountainhead®, Surrell®, Staron® and other acrylic based materials.
Especially configured to leave a swirl-free cut in solid surface materials.
Thick, stable plate reduces vibration that degrades the cut and shortens tool life.
The blade is suitable for a variety of saw configurations.
Its 0° hook angle virtually eliminates self-feeding when it is used with a radial arm saw.
MODIFIED
TRIPLE CHIP GRIND		 TEN INCH BLADES SOLID SURFACE
A.G.E. 1072/SOLIDSURFACE 10 INCH - 72 TOOTH - SOLID SURFACE CARBIDE - ZERO HOOK - 1 INCH BORE $89.00

TWELVE INCH BLADES
A.G.E. 1284/SOLIDSURFACE 12 INCH - 84 TOOTH - SOLID SURFACE CARBIDE - ZERO HOOK - 1 INCH BORE
 $109.00



 A.G.E. STEEL FORCE

 Designed to easily cut through steel studs, steel sheets, metal rods, steel pipes, channels and rebar.
Specially designed carbide grade resists breakage and lasts longer than standard carbide or abrasive discs.
Ideal blade for cutting through all sorts of metal due to its unique tooth geometry, special carbide and its chip limiting steel support.
To be used on special cut-off machines such as Jepson.
Using the right RPM (Low) is critical.
MODIFIED
TRIPLE CHIP GRIND		 SEVEN AND A QUARTER INCH BLADES STEEL FORCE
A.G.E./STEELFORCE 7 1/4
 7 1/4 INCH - 36 TOOTH - 5/8 INCH  BORE - DIAMOND KNOCKOUT - 3200 MAX RPM
 $69.98

FOURTEEN INCH BLADES
A.G.E./STEELFORCE 1472
 14 INCH - 72 TOOTH - 1 INCH BORE - 1600 MAX RPM
 $129.86



A.G.E. PLASTIC

Cuts clean, no-melt, chip-free cuts in PVC, acrylics and other plastic materials.
Higher tooth count blades will work better in thin material.
Suitable for cross cutting, trimming and mitering wood and art excellent for cutting plywood and laminate particle board.
MODIFIED
TRIPLE CHIP GRIND		 EIGHT INCH BLADES PLASTIC
A.G.E. 864/PLASTIC
 8 INCH - 64 TOOTH - PLASTIC CUTTING - 5/8 INCH  BORE - DIAMOND KNOCKOUT
 $85.00












Timberline TIMBERLINE SAW BLADES
From Amana Tools
Made with only the best tool steel and long-wearing micro-grain carbide.
 Timberline
THIN KERF - CORDLESS/PORTABLE TABLE/SKIL SAW BLADES - GENERAL
ITEM NUMBER
PRICE
CONTRACTOR - WOOD CUTTING - TRIM

Designed with an ultra-thin kerf requiring less horsepower and reduced stock loss.
Fully tensioned, hand hammered and heat-treated for virtually no run-out.
Will fit most popular brands of portable batter and electric saws.
CALL TO DETERMINE WHETHER BLADE WILL FIT YOUR SPECIFIC SAW
ALTERNATE TOP BEVEL FIVE AND THREE EIGHTHS TO SIX AND A HALF INCH BLADES
 WOOD CUTTING | TRIM
TIMB 5 1/2 IN 30 TOOTH
TIMB640ATB
TIMB 6 1/2 IN 24 TOOTH		 5 3/8 INCH to 5 1/2 INCH - 30 TOOTH -  5/8 INCH BORE
6 INCH - 40 TOOTH - 1/2 INCH BORE (For Porter Cable SAW BOSS Saws)
6 1/2 INCH - 24 TOOTH - 5/8 INCH BORE - DIAMOND KNOCKOUT
 $19.50
$18.49
$18.80



CROSS-CUTTING AND FINISHING

Designed for superior cross-cutting and trimming of wood paneling, plywood, and man-made materials.
Has an alternate face shear design for exceptionally clean cuts.
ALTERNATE TOP BEVEL SEVEN AND A QUARTER INCH BLADES CROSSCUT | FINISH
TIMB 7 1/4 IN 36 TOOTH 7 1/4 INCH - 36 TOOTH - 5/8 INCH BORE - DIAMOND KNOCKOUT
 $19.29



GENERAL PURPOSE

Ideal for framing work (rip and crosscut).
Perfect for 8 1/4 inch Side-Winder and/or Worm-Drive Saws.
ALTERNATE TOP BEVEL EIGHT AND A QUARTER INCH BLADES
 RIPPING | CROSSCUT
TIMB 8 1/4 IN 24 TOOTH
TIMB 8 1/4 IN 40 TOOTH
8 1/4 INCH - 24 TOOTH - 5/8 INCH BORE - DIAMOND KNOCKOUT
8 1/4 INCH - 40 TOOTH - 5/8 INCH BORE - DIAMOND KNOCKOUT 		$24.20
$26.96



THIN KERF - CORDLESS/PORTABLE TABLE/SKIL SAW BLADES - SPECIALTY



ALL-PURPOSE PROFESSIONAL SPECIALTY

Designed for both Contractors and Do-It-Yourselfers.
Popular all-purpose, durable blade for ripping and/or cross-cutting wood framing, decking and plywood.
Fits most popular brand portable 7 1/4 inch Electric & Worm-Drive Saws.
ALTERNATE TOP BEVEL SEVEN AND A QUARTER INCH BLADES RIPPING | CROSSCUT
TIMB 7 1/4 IN 24 TOOTH
TIMB 7 1/4 IN 40 TOOTH
 7 1/4 INCH - 24 TOOTH - 5/8 INCH  BORE - DIAMOND KNOCKOUT
7 1/4 INCH - 40 TOOTH - 5/8 INCH  BORE - DIAMOND KNOCKOUT
 $7.50
$13.90



NAIL CUTTING - FINISHING

 Designed for cutting and finishing recycled lumber and flooring with hidden or embedded nails.
FLAT-TOP GRIND
 SEVEN AND A QUARTER INCH BLADES NAIL | FINISHING
TIMB/7 1/4 NAIL
 7 1/4 INCH - 14 TOOTH - 5/8 INCH BORE - DIAMOND KNOCKOUT
 $20.50



MITRE SAW BLADES
CALL TO DETERMINE WHETHER BLADES WILL FIT YOUR SPECIFIC SAW



CROSS-CUTTING - FINISHING

 Designed for cross-cutting and finishing of softwoods and hardwoods.
The 0 degree hook angle allos for use on a broad range of material and machine types.
Perfect for Mitre Box Saws, Compound Mitre Saws, Sliding and Dual-Sliding Compound Mitre Saws.
ALTERNATE TOP BEVEL
TWELVE INCH BLADES
  SOFTWOODS
TIMB1240/ATB/0 HOOK
TIMB1260/ATB/0 HOOK
TIMB12100/ATB/0 HOOK
 12 INCH - 40 TOOTH - ZERO HOOK  - 1 INCH BORE
12 INCH - 60 TOOTH - ZERO HOOK  - 1 INCH BORE
12 INCH - 100 TOOTH - ZERO HOOK  - 1 INCH BORE
 $48.92
$59.37
$76.47
TRIPLE CHIP GRIND
TEN INCH BLADES
 HARDWOODS
TIMB1060/TCG/0 HOOK
TIMB1080/TCG/0 HOOK		 10 INCH - 60 TOOTH - ZERO HOOK - 5/8 INCH BORE
10 INCH - 80 TOOTH - ZERO HOOK - 5/8 INCH BORE		 $40.75
$49.78



FINISHING - GENERAL PURPOSE

 Excellent for cross-cutting, finishing and general purpose cutting of softwoods.
 0 degree hook angle allows for use on a broad range of materials and machine types.
For use with Mitre Saws or Stationary Table Saws
ALTERNATE TOP BEVEL
TEN INCH BLADES
 SOFTWOODS
TIMB1040/ATB/0 HOOK
TIMB1060/ATB/0 HOOK
TIMB1080/ATB/0 HOOK
10 INCH - 40 TOOTH - ZERO HOOK - 5/8 INCH BORE
10 INCH - 60 TOOTH - ZERO HOOK  - 5/8 INCH BORE
10 INCH - 80 TOOTH - ZERO HOOK  - 5/8 INCH BORE
 $30.68
$40.75
$49.78



FINISHING - SPECIALTY

Designed for cross-cutting and finishing plastics, double-sided melamine, and plastic laminated MDF.
0 degree hook angle allows for use on a broad range of materials and machine types.
For use with Mitre Saws or Stationary Table Saws
TRIPLE CHIP GRIND
TWELVE INCH BLADES
 HARDWOODS
TIMB12100/TCG/0 HOOK 12 INCH - 100 TOOTH - ZERO HOOK - 1 INCH BORE $80.98



INDUSTRIAL - MDF & LAMINATE

 Designed for chip-free cutting of MDF laminates and chipboard.
TRIPLE CHIP GRIND
TWELVE INCH BLADES
 MDF | LAMINATE
TIMB/1296/MDF 12 INCH - 96 TOOTH - 1 INCH BORE $82.18



SLIDING COMPOUND

 Designed with a 3 degree negative hook angle to prevent aggressive wood grabbing.
Excellent for cross-cutting and trimming crown moulding, hardwoods and softwoods.
For use with Sliding Compound Mitre Saws.
ALTERNATE TOP BEVEL EIGHT AND A HALF INCH BLADES
 CROSSCUT | TRIM
TIMB8 1/2-40ATB
TIMB8 1/2-60ATB
 8 1/2 INCH - 40 TOOTH - NEGATIVE 3 HOOK - 5/8 INCH BORE
8 1/2 INCH - 60 TOOTH - NEGATIVE 3 HOOK - 5/8 INCH BORE
 $28.75
$35.39



TIMBERFORCE GENERAL PURPOSE WOOD CUTTING

 Designed with an anti-kickback safety feature, and cooling slots to prevent heat build-up.
ALTERNATE TOP BEVEL SEVEN AND A QUARTER INCH BLADES WOOD CUTTING
TIMBERFORCE/ 7 1/4 7 1/4 INCH - 24 TOOTH - 5/8 INCH BORE - DIAMOND KNOCKOUT
 $15.00



METAL CUTTING



ALUMINUM & NON-FERROUS

Designed for cutting thin, non-ferrous products and plastics.
A coolant or blade wax and proper clamping devices should be used.
(WARNING: THESE BLADES ARE NOT FOR USE ON STEEL, IRON, OR OTHER FERROUS ITEMS)
TRIPLE CHIP GRIND SEVEN AND A QUARTER INCH BLADES NON-FERROUS
TIMB/7 1/4/ALUM
7 1/4 INCH - 50 TOOTH - 5/8 INCH BORE - DIAMOND KNOCKOUT 
 $43.20

TWELVE INCH BLADES
TIMB1296/TCG/ALUM 12 INCH - 96 TOOTH - 1 INCH BORE $82.18



STEELFORCE STEEL/METAL CUTTING BLADES

 Carbide-grade is specially designed to resist breakage and lasts longer than standard-grade or abrasive discs.
Easily cuts through steel studs, steel sheets, metal rods, steel pipes, channels and rebar.
Reduces noise, sparking and burrs on edges of cutting surface. Eliminates dust clouds.
MODIFIED TCG
 SEVEN AND A QUARTER INCH BLADES
 STEEL | METAL
A.G.E./STEELFORCE/7 1/4 STEELFORCE 7 1/4 INCH - 36 TOOTH - MODIFIED TCG - 5/8 INCH BORE $69.98
TRIPLE CHIP GRIND FOURTEEN INCH BLADES
A.G.E./STEELFORCE/1472 STEELFORCE 14 INCH - 72 TOOTH - TRIPLE CHIP GRIND - 1 INCH BORE $129.86



DADO SET

Designed to cut grooves and dados from 1/8" to 13/16".
The standard set consists of two outside saw blades, four 1/8" chippers, and one 1/16" chipper.
Black oxide finish. Dado set includes Shim Set and instructions.



TIMB/DADO SET
DESCRIPTION DIA.
 TEETH
 GRIND
 INCH
 MM
 INCH
 MM
 BORE
Outside Right Blade
8"
24
ATB/FT
.126
3.2
.071
1.8
5/8"
Outside Left Blade
8"
24
ATB/FT
.126
3.2
.071
1.8
5/8"
1/8" Chipper
8"
2
FT
.095
2.4
.125
3.2
30MM
1/16" Chipper
8"
2
FT
.154
3.4
.062
1.6
1"



$113.95



HOLE SAW BLADES

Precision-sharpened teeth for smooth, fast cuts.
Cuts clean holes in wood, plastic, metal, gypsum boards.
Lasts up tp 5 times longer than carbon steel hole saws.
Ideal for carpenters, electricians, plumbers, and Do-It Yourselfers.
BI-METAL
HOLE SAWS
TIMB/HOLE/2 INCH
TIMB/HOLE/2 1/8 INCH
TIMB/HOLE/2 1/2 INCH
TIMB/HOLE/3 INCH
TIMB/HOLE/3 1/2 INCH
TIMB/HOLE/4 INCH
TIMB/HOLE/4 1/2 INCH
TIMB/HOLE/6 INCH
2 INCH  DIAMETER - 1 3/4 INCH DEPTH
2 1/8 INCH DIAMETER - 1 3/4 INCH DEPTH
2 1/2 INCH DIAMETER - 1 3/4 INCH DEPTH
3 INCH DIAMETER - 1 3/4 INCH DEPTH
3 1/2 INCH DIAMETER - 1 3/4 INCH DEPTH
4 INCH DIAMETER - 1 3/4 INCH DEPTH
4 1/2 INCH DIAMETER - 1 3/4 INCH DEPTH
6 INCH DIAMETER - 1 3/4 INCH DEPTH
 $9.92
$11.15
$11.59
$14.06
$16.90
$19.66
$23.27
$28.90



HOLE SAW MANDRELS
To be used in conjunction with Timberline Bi-Metal Hole Saws.
1/4 INCH high speed steel pilot drill included.



TIMB/MANDREL/602-330
TIMB/MANDREL/602-332
TIMB/MANDREL/602-338		 FOR 9/16 INCH - 1 3/16 INCH HOLE SAW with 3/8 INCH HEX - 3/8 INCH CHUCK
FOR 1 1/4 INCH - 6 INCH HOLE SAW with 7/16 INCH HEX - 1/2 INCH CHUCK
FOR 1 1/4 INCH - 6 INCH HOLE SAW with 3/8 INCH HEX - 3/8 INCH CHUCK		 $4.90
$7.55
$6.84



Sales: Router Bits

Sharpening
E-Mail

Home


PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE
(c) 2006  - 2008 - Rocky Mountain Sharp Shop
Site Design by: Top-notch Document Processing